DPF Product Catalog

Click to return to Diesel Emission Service



Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


DESVM6002

H-Duty vert mount w/ isolators (straight)

Features:


  • DESVM6002 mounting kit brackets are designed to mount "passive" DPF systems (NOT EXCEEDING 125 lbs.)vertically utilizing rubber isolation with DESVM6004 Stanchion kit (SHOWN BUT NOT INCLUDED).
  • Constructed and welded using mild steel.
  • All parts are powder coated black.
  • All hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8 (included).

Installation:


  1. Brackets must be assembled as shown and hardware torqued to **listed standards, FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM OR INJURY TO PERSONS.
  2. Do not tighten isolation hardware to the listed torque specifications! Reasonable care should be taken when tightening, to ensure equal compression and avoid excessive compression of the isolator.
  3. After filter and heat shield (purchased seperately) are installed, ensure the DPF system does not obstruct or impair the drivers use of the mirrors.
  4. **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)

Documents:


Name Size Added Download
DES VM6002 INSTALL MANUAL.pdf 2.7 MB 02/16/2015