DPF Product Catalog

Click to return to Diesel Emission Service



Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


DESM4102

"Heavy Duty" inside frame isolated mounting kit

Features:


  • DESM4102 mounting kit brackets are designed to mount DPF systems which exceed 120lbs. and are NOT larger than 14" in diameter. (Brackets can accomodate larger diameter filters if frame is sufficient distance from roadway).
  • Constructed from 1/4" and 3/8" mild steel.
  • Brackets are powder coated black. Filter mounting bands ( purchased separately) are powder coated "HI TEMP" black.
  • Hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8 (included).

Installation:


  1. Care should be taken to ensure no air lines, fuel lines, and/or wiring is between frame and brackets before tightening.
  2. Brackets must be assembled as shown and hardware torqued to **listed standards, FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM
  3. Position the filter mounting brackets to ensure adequate ground clearance between filter and roadway.
  4. **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)

Documents:


Name Size Added Download
DES M4102 INSTALL MANUAL.pdf 2.1 MB 10/06/2014