DPF Product Catalog

Click to return to Diesel Emission Service

Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


SCP35 Horizontal mounting kit


  • DESM5135 mounting kit brackets are designed to mount the SCP35 "Active" systems.
  • Brackets are constructed from 1/4" and 3/8" mild steel.
  • Mounting bands are constructed from 3/16" mild steel.
  • Brackets are powder coated black. Filter mounting bands are powder coated "HI TEMP" black.
  • Hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8 (included).


  1. Care should be taken to ensure no air lines, fuel lines, and/or wiring is between frame and brackets before tightening.
  2. Brackets must be assembled as shown and hardware torqued to **listed standards, CAUTION! Tighten band hardware as necessary to prevent crushing of the filter outer can. FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM
  3. Position the filter mounting brackets to ensure adequate ground clearance between filter and roadway.
  4. **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)


Name Size Added Download
DES M5135 INSTALL MANUAL.pdf 2.6 MB 10/27/2014