DES7844
MIRROR FINISH DPF Enclosure 44" (inside width) "FL/KW" style
Features:
- DES7844 is designed as an enclosure to mount your DPF with a mirror finish appearance and styling of factory "OEM" tool boxes found on various Freightliner and Kenworth model trucks.
- DES7844 is designed to mount filters with a maximum length of 39". These filters are mounted to the chassis of the DPF enclosure with bands purchased separately.
- Step, side panels, and cover are a polished mirror finish 304 Stainless Steel. This entire assembly can be removed for access to the filter by simply removing (4) bolts
- The DES7844 chassis is constructed and welded using 1/4" and 3/8" mild steel.
- Chassis hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8, Cover hardware is grade 5 zinc plated (included).
Installation:
- Remove existing tool box and choose the proper location for the new DPF enclosure. Mark and drill new mounting holes as needed.
- All components must be assembled as shown and hardware torqued to **listed standards, Tighten band hardware as necessary to prevent crushing of the filter outer can. FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM.
- IMPORTANT Filter can be mounted opposite of normal exhaust flow direction depending on existing exhaust configuration needs.
- **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.) 5/8-11 GRADE 5 (110-150 ft lbs.)