DPF Product Catalog

Click to return to Diesel Emission Service



Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


DES7236

DPF Enclosure 36" (inside width) "FL/KW" style

Features:

  • DES7236 is designed as an enclosure to mount your DPF in and give the appearance and styling of factory "OEM" tool boxes found on various Freightliner and Kenworth model trucks.
  • DES7236 is designed to mount SC28 and SC35 "passive" systems. It also designed to mount in the same location as the "OEM" tool box.
  • "IMPORTANT" When it has been determined the SC35 system is the choice for your application you MUST order the filter using A11U-0600. This filter has inlet and outlet hats shortened to allow installation in the DES7136.
  • Steps and side panels are 5000 series marine grade aluminum. Cover is polished 3000 series aluminum. This entire assembly can be removed for access to the filter by simply removing (4) bolts.
  • The DES7236 chassis is constructed and welded using 1/4" and 3/8" mild steel.
  • Chassis hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8, Cover hardware is grade 5 zinc plated (included).

Installation:

  1. Remove existing tool box and choose the proper location for the new DPF enclosure. Mark and drill new mounting holes as needed.
  2. When mounting the SC28, the DPF must be mounted around the inlet and outlet hats only, then mounted to the inside bottom flange using the (2) bands provided by CDTi.
  3. When mounting the SC35, the DPF must be mounted around the center body and then mounted to the DES7136 chassis using (2) DESSC35 bands purchased separately.
  4. All components must be assembled as shown and hardware torqued to **listed standards, Tighten band hardware as necessary to prevent crushing of the filter outer can. FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM.
  5. **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.) 5/8-11 GRADE 5 (110-150 ft lbs.)

Documents:


Name Size Added Download
DES 7236 INSTALL MANUAL.pdf 1.7 MB 01/22/2015