You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser.
We currently support Internet Explorer 9+, but we highly recommend you install
Please notify your IT department if you need assistance.
Care should be taken to ensure no air lines, fuel lines, and/or wiring is between frame and brackets before tightening.
Brackets must be assembled as shown and hardware torqued to **listed standards, CAUTION! Tighten band hardware as necessary to prevent crushing of the filter outer can FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM
Position the filter mounting brackets to ensure adequate ground clearance between filter and roadway.
**TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.)
7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)