DPF Product Catalog

Click to return to Diesel Emission Service



Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


DESM9010-UP

ADVCCRT VERTICAL MOUNT UPGRADE KIT

Features:

  • DESM9010-UP Supply's upgraded components intended to replace previous versions of the DESM9010 system. Mounting bracket upgrades are designed to mount the Johnson Matthey "AdvCCRT" system.
  • DESM9010-UP components have been tested and approved by Johnson Matthey for use on their DPF systems
  • Constructed and welded using mild steel
  • All parts are powder coated in black.
  • All hardware (hex bolts, flat washers, nylock nuts) are yellow zinc chromate, grade 8 (included).

Installation:

  1. Brackets must be assembled as shown and hardware torqued to **listed standards, FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM OR INJURY TO PERSONS.
  2. DO NOT tighten isolation hardware to the listed torque specifications! Reasonable care should be taken to ensure equal compression and avoid excessive compression of the isolator.
  3. After filter and guard are installed, ensure the DPF system does not obstruct or impair the drivers use of the mirrors.
  4. ** TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)

Documents:


Name Size Added Download
DES M9010-UP INSTALL MANUAL.pdf 1.7 MB 02/09/2015