DPF Product Catalog

Click to return to Diesel Emission Service



Warning: You're currently running a old version of Internet Explorer. Due to security and much newer technology, please upgrade or replace your browser. We currently support Internet Explorer 9+, but we highly recommend you install Mozilla Firefox or Google Chrome

Please notify your IT department if you need assistance.

For more information on why you need to upgrade your browser, please read / refer your IT to this article: Dear Web User, Please Upgrade Your Browser
Printable PDF


DESM5010

Horizontal mounting kit for SCP17-23

Features:


  • DESM5010 mounting kit brackets are designed to mount SCP 17-23 DPF "active" systems to the outside of the frame rail while allowing the filter body to be positioned under the frame of the truck
  • Mounting the filter with these brackets generally does not require an additional heat shield
  • Constructed from 1/4" mild steel.
  • Brackets are powder coated black.
  • Hardware (hex bolts, flat washers, nylock nuts) are recommended to be yellow zinc chromate grade 8.

Installation:


  1. Attach the inlet base of filter to the slots provided in the larger bracket, then attach outlet section to the angle using mounting bands provided by the filter manufacturer.
  2. Care should be taken to ensure no air lines, fuel lines, and/or wiring is between frame and brackets before tightening.
  3. Position the adjustable filter mount to ensure adequate ground clearance between filter and roadway.
  4. Hardware should be torqued to **listed standards, FAILURE TO DO SO MAY CAUSE DAMAGE TO THE "DPF" SYSTEM
  5. **TORQUE SPECIFICATIONS: 3/8-16 GRADE 8 (40-50 ft lbs.) 7/16-14 GRADE 8 (60-75 ft lbs.) 1/2-13 GRADE 8 (90-110 ft lbs.)

Documents:


Name Size Added Download
DES M5010 INSTALL MANUAL.pdf 1.2 MB 08/08/2014